CM Stacker

RobThePyro · Post by **RobThePyro** » 17 Jul 2008, 16:05

Hey guys

Iv searched high and low but I cant seem to find anybody/buisness in the country that has stock of the Coolermaster stacker 830/832 case! (black) anyone know where I could find one?

Rob~

I34z1k · Post by **I34z1k** » 17 Jul 2008, 16:07

In my study

DAE_JA_VOO · Post by **DAE_JA_VOO** » 17 Jul 2008, 16:09

You suck at searching

CM at LandmarkPC

Frozenfireside · Post by **Frozenfireside** » 17 Jul 2008, 16:21

Foogle-I found lots.Here is one at take2

Post by **Stuart** » 17 Jul 2008, 16:29

Frozenfireside wrote:Foogle-I found lots.Here is one at take2

With a nice little "Supplier out of stock" label too! Ooooooh ... I wonder what that means?

Frozenfireside · Post by **Frozenfireside** » 17 Jul 2008, 16:36

schase wrote:
Frozenfireside wrote:Foogle-I found lots.Here is one at take2
With a nice little "Supplier out of stock" label too! Ooooooh ... I wonder what that means?

I'm guessing but it might mean they haven't ordered new stock

Whoops missed that but at least they have the ability to get stock.

I tend to give a call to say prophecy and ask for a piece of hardware, even if it isn't in stock. They usually say 'give us a few days to get it' and hey presto it's there. Happened with my Thermal paste. Not a biggie. I usually don't need/want next day delivery.

RobThePyro · Post by **RobThePyro** » 17 Jul 2008, 16:48

MMM i been mailing a whole bunch of places, prophecy just gave me a flat NO, landmarkpc hasnt replyed... (and i pmed andy on systemshock, no reply...). I also got good service from the guy at ZAPS, who said he couldnt get stock from his supplier... so yea, i dont think there are any around atm, unless some one can prove me wrong?

Rob~

EDIT: Dae btw they were one of the first places i tryed

but as i said i havnt got a reply from them...(2days now) iv sent about 6 or 7 emails out to places looking for stock and i only got about half back in replys and none of them had anything...

warmachine · Post by **warmachine** » 17 Jul 2008, 16:56

Frontosa? Java?where abouts are you?

RobThePyro · Post by **RobThePyro** » 17 Jul 2008, 17:13

AH, i just got hold of andy-landmarkpc he has stock! *YAY* so ah should i get an 830 or an 832?

Rob~

DAE_JA_VOO · Post by **DAE_JA_VOO** » 17 Jul 2008, 21:39

Get the one YOU like

I34z1k · Post by **I34z1k** » 17 Jul 2008, 21:57

RTP, check the 832 out in person, I hated it until I saw if for real...

RobThePyro · Post by **RobThePyro** » 17 Jul 2008, 22:03

Just ordered a Black 832, gonna be my case for a while till im well enough to go to work and play with all the big toys (milling machine etc.) and actually MAKE my own aluminium case lol...

Im gonna mount a Trip rad in the bottom of my 832 though, should be interesting. Dae I understand you have some experiance in this lol, would you say it would be better to use a 114mm hole saw, or cut out the rad shape with a dremel?

Rob~

DAE_JA_VOO · Post by **DAE_JA_VOO** » 17 Jul 2008, 22:33

RobThePyro wrote:Dae I understand you have some experiance in this lol, would you say it would be better to use a 114mm hole saw, or cut out the rad shape with a dremel?

I do, yes. I helped another guy get his trip raddy into his Stacker.

This is all about personal preference. If you want the easy way out, use a hole saw. It'll be quick and will almost definitely look perfect. With a Dremel, it'll be WAY more work, and depending your your dremel skills, it may or may NOT look so good.

Either way doesn't matter, nobody will see the hole(s) anyway.

RobThePyro · Post by **RobThePyro** » 17 Jul 2008, 22:54

YEA, cool but A) whats better for performance? Im thinking cut the shape out?

and B) there is allready that rectangular cutout in the bottom of the case(with the mesh), which would make using a holesaw VERY difficult methinks!

Rob~

DAE_JA_VOO · Post by **DAE_JA_VOO** » 17 Jul 2008, 23:36

Hmmm, the stacker i worked on didn't have that hole at the bottom.

So yeah, go with the Dremel route then. Doing the stuff with the holesaw now would be plain silly

RobThePyro · Post by **RobThePyro** » 18 Jul 2008, 09:34

BEEEEEEEEEEEEACH!!!! Andy was misinformed and there are NO stackers in the country... now what to do... GOSH.

Demoraliser · Post by **Demoraliser** » 18 Jul 2008, 10:54

RobThePyro wrote:BEEEEEEEEEEEEACH!!!! Andy was misinformed and there are NO stackers in the country... now what to do... GOSH.

How about the Silverstone TJ07? I see this distributor has it. You need to find a dealer that deals with them though. I dropped them mail yesterday, got no reply.

RobThePyro · Post by **RobThePyro** » 18 Jul 2008, 11:26

@Demoraliser
Thanks man that might just be what i do

I spoke to Andy again though and he said stock is coming next month, but they have discontinued the 832. So I think im gonna bite the bullet and just wait until next month to get my case!...

Rob~

StoneIce · Post by **StoneIce** » 18 Jul 2008, 11:58

The Stacker case look more beautiful. I like that case too. I also worried about the stock. maybe landmark PC is the only place in stock.

DAE_JA_VOO · Post by **DAE_JA_VOO** » 18 Jul 2008, 12:05

Dude.... TJ07.

If you can afford it... and you still take the stacker... i'll slap you

RobThePyro · Post by **RobThePyro** » 18 Jul 2008, 12:24

@DAE Arnt they like R3k ? (i cant afford that...) and where do you find them!?!

warmachine · Post by **warmachine** » 18 Jul 2008, 12:54

cm690? antec 300? or the 1200?

DAE_JA_VOO · Post by **DAE_JA_VOO** » 18 Jul 2008, 13:17

Yeah dude they're pricey, but they're also pure awesomeness

Like i said, IF you can afford one, get one

Demoraliser · Post by **Demoraliser** » 18 Jul 2008, 13:33

RobThePyro wrote:@DAE Arnt they like R3k ? (i cant afford that...) and where do you find them!?!

Yeah, where can i get one from too? I called the landlines at the link i provided earler, numbers dont exist!

StoneIce · Post by **StoneIce** » 18 Jul 2008, 13:39

DAE_JA_VOO wrote:Yeah dude they're pricey, but they're also pure awesomeness

Like i said, IF you can afford one, get one

hehehe, hey DAE , when you finnish your ENDORPHIN ? i just asking