UNclipping a POV 9800 GT graphics card
UNclipping a POV 9800 GT graphics card
I'm having trouble unclipping my 9800GT from my Asus M3A motherboard. Can anyone illustrate this for me?
"Because I don't say it...don't mean I ain't thinking it!"
Re: UNclipping a POV 9800 GT graphics card
Judging from your laptop charger post, I would deduce you are not very familiar with a pc.
On the board right at the back of the PCI-E slot, there is normally a small clip that holds the back of the GFX card in place. It has a small "lever" that you push back to get the back of the card out.
And make sure that you have unscrewed it from the back of the pc as well.
Hope that helps.
Edit: And an illustration is not needed. 'n Quick google will show you everything you need to. Or just LOOK at your pc and you could probably figure it out.
On the board right at the back of the PCI-E slot, there is normally a small clip that holds the back of the GFX card in place. It has a small "lever" that you push back to get the back of the card out.
And make sure that you have unscrewed it from the back of the pc as well.
Hope that helps.
Edit: And an illustration is not needed. 'n Quick google will show you everything you need to. Or just LOOK at your pc and you could probably figure it out.
CPU: AMD Phenom II X2 555 (OC'ed to 3.8Ghz)
CPU Cooler: CM Hyper TX3 P/P
GPU: Sapphire Radeon HD5850
Motherboard: Asus M4A785T-M
Memory: 4GB Corsair XMS3 DDR3 1333
Case: Zalman Z7
Display: Samsung Syncmaster 2243BWX
CPU Cooler: CM Hyper TX3 P/P
GPU: Sapphire Radeon HD5850
Motherboard: Asus M4A785T-M
Memory: 4GB Corsair XMS3 DDR3 1333
Case: Zalman Z7
Display: Samsung Syncmaster 2243BWX
- THE_STIG
- Spoiled Brat
- Posts: 11762
- Joined: 26 Aug 2010, 20:33
- Processor: Core i7 6800k
- Motherboard: Asrock x99 taichi
- Graphics card: Zotac 1080ti amp extreme
- Memory: 16gb(4x4gb) corsair vengeance
- Location: Some say.......
Re: UNclipping a POV 9800 GT graphics card
Pretty much what IcePick said......
Re: UNclipping a POV 9800 GT graphics card
Or you mean "lift" up.
"Because I don't say it...don't mean I ain't thinking it!"
-
- Registered User
- Posts: 446
- Joined: 21 Dec 2010, 09:02
Re: UNclipping a POV 9800 GT graphics card
No unclip then lift up. It's designed to lock the card in place. Just unplug your PC from the wall and touch the chassis with your hands first OK?
I no longer think of myself as Atheist however I reject religion as a concept where you must do x because someone says so. May contain nuts.
Re: UNclipping a POV 9800 GT graphics card
Did it, done that. Cleaned it.
"Because I don't say it...don't mean I ain't thinking it!"
- hamin_aus
- Forum Moderator
- Posts: 18363
- Joined: 28 Aug 2003, 02:00
- Processor: Intel i7 3770K
- Motherboard: GA-Z77X-UP4 TH
- Graphics card: Galax GTX1080
- Memory: 32GB G.Skill Ripjaws
- Location: Where beer does flow and men chunder
- Contact:
Re: UNclipping a POV 9800 GT graphics card
warm soapy waterRajiv wrote:Cleaned it.
Re: UNclipping a POV 9800 GT graphics card
nope. paintbrush. for dust. (Clogged up heatsink.)
"Because I don't say it...don't mean I ain't thinking it!"
- THE_STIG
- Spoiled Brat
- Posts: 11762
- Joined: 26 Aug 2010, 20:33
- Processor: Core i7 6800k
- Motherboard: Asrock x99 taichi
- Graphics card: Zotac 1080ti amp extreme
- Memory: 16gb(4x4gb) corsair vengeance
- Location: Some say.......
Re: UNclipping a POV 9800 GT graphics card
Compressor does a much better jobRajiv wrote:nope. paintbrush. for dust. (Clogged up heatsink.)