PSU Sleeving advice.
- Prime
- Registered User
- Posts: 27729
- Joined: 01 Mar 2004, 02:00
- Location: Getting into trouble
- Contact:
PSU Sleeving advice.
Hi,
Quick question: how does one remove the 4 pin Mobo plugs and 6 pin PCI-E plug connectors.
thanks
Quick question: how does one remove the 4 pin Mobo plugs and 6 pin PCI-E plug connectors.
thanks
- djwez
- The next Sheldon Cooper
- Posts: 5666
- Joined: 20 Aug 2008, 17:51
- Processor: AMD PII x3 720 (4th core unlocke
- Motherboard: Asus M4A785TD-M EVO
- Graphics card: Sapphire 7790 Dual x OC
- Memory: 8GB 1600 Vengeance kit
- Location: Behind you....
Re: PSU Sleeving advice.
*goes to look at the connectors*
im guessing you would do the same as you would with the 20-24 pin mobo conector
just need a really small flat screw driver
im guessing you would do the same as you would with the 20-24 pin mobo conector
just need a really small flat screw driver
Re: PSU Sleeving advice.
Prime, with a lot of patience.
I sat with a tiny flat screwdriver and a pin After a couple you get pretty good at it... Worth the effort though.
PS: you can actually buy a nifty tool that does it for you, one *click* and you're done. Just don't ask me where you can buy it
I sat with a tiny flat screwdriver and a pin After a couple you get pretty good at it... Worth the effort though.
PS: you can actually buy a nifty tool that does it for you, one *click* and you're done. Just don't ask me where you can buy it
- djwez
- The next Sheldon Cooper
- Posts: 5666
- Joined: 20 Aug 2008, 17:51
- Processor: AMD PII x3 720 (4th core unlocke
- Motherboard: Asus M4A785TD-M EVO
- Graphics card: Sapphire 7790 Dual x OC
- Memory: 8GB 1600 Vengeance kit
- Location: Behind you....
Re: PSU Sleeving advice.
i think they have them at ppcs but should be around somewhere locally
Re: PSU Sleeving advice.
In some of those cheap vantec molex connector kits you can get them. The kit I bought about 3 years ago cost about R30.
- Prime
- Registered User
- Posts: 27729
- Joined: 01 Mar 2004, 02:00
- Location: Getting into trouble
- Contact:
Re: PSU Sleeving advice.
Thanks Guys.
I tried a pin, but it only works on the older connectors and these are already black so i cannot see inside them.
Will seek out said tool
I tried a pin, but it only works on the older connectors and these are already black so i cannot see inside them.
Will seek out said tool
Re: PSU Sleeving advice.
where can i buy it?Augur wrote:PS: you can actually buy a nifty tool that does it for you, one *click* and you're done. Just don't ask me where you can buy it
-
- Registered User
- Posts: 5393
- Joined: 01 Apr 2007, 02:00
-
- Registered User
- Posts: 5393
- Joined: 01 Apr 2007, 02:00
Re: PSU Sleeving advice.
You can get them from Sybarictic too. they come with said vantec kit. here's the link http://www.sybaritic.co.za/store/index.php?cPath=72_239
"Pull The Trigger And The Nightmare Stops"
-------------------------------------------------
http://www.skampy.co.za
http://grimandy.mybrute.com
-------------------------------------------------
http://www.skampy.co.za
http://grimandy.mybrute.com
- djwez
- The next Sheldon Cooper
- Posts: 5666
- Joined: 20 Aug 2008, 17:51
- Processor: AMD PII x3 720 (4th core unlocke
- Motherboard: Asus M4A785TD-M EVO
- Graphics card: Sapphire 7790 Dual x OC
- Memory: 8GB 1600 Vengeance kit
- Location: Behind you....
Re: PSU Sleeving advice.
i don't think any of those are going to work hey. they molex pin removers and prime is wanting the 6pin pcie and 4 pin cpu connector pins removed they slightly different (correct me if i am wrong)
- Prime
- Registered User
- Posts: 27729
- Joined: 01 Mar 2004, 02:00
- Location: Getting into trouble
- Contact:
Re: PSU Sleeving advice.
Wez has a point?djwez wrote:i don't think any of those are going to work hey. they molex pin removers and prime is wanting the 6pin pcie and 4 pin cpu connector pins removed they slightly different (correct me if i am wrong)
- djwez
- The next Sheldon Cooper
- Posts: 5666
- Joined: 20 Aug 2008, 17:51
- Processor: AMD PII x3 720 (4th core unlocke
- Motherboard: Asus M4A785TD-M EVO
- Graphics card: Sapphire 7790 Dual x OC
- Memory: 8GB 1600 Vengeance kit
- Location: Behind you....
Re: PSU Sleeving advice.
this is what you want http://www.performance-pcs.com/catalog/ ... ts_id=2077 (i dot know if it can remove the pci e pins but i guess they almost the same, i would of had a look for you but my friend needed my psu and he only getting his on tuesday)
this one is for molex connectors (the one that goes into the cd rom / hard drive (non sata)
http://www.performance-pcs.com/catalog/ ... ts_id=2076
hope it helps a lil
this one is for molex connectors (the one that goes into the cd rom / hard drive (non sata)
http://www.performance-pcs.com/catalog/ ... ts_id=2076
hope it helps a lil