Watercooling Setups - Advice and pics here
- Firestrm_ZA
- Deliciously Moist Cake
- Posts: 16650
- Joined: 13 Mar 2008, 02:00
- Processor: AMD Ryzen 7 5950X
- Motherboard: ROG Strix B550-F Gaming
- Graphics card: EVGA 3080Ti XC3 Ultra
- Memory: 32GB 3600 G-Skill Trident Z RGB
Watercooling Setups - Advice and pics here
I dunno if a post like this has ever been made but here goes.
I think we should all start posting pics of our watercooled setups? *edit* only pics please and comments... but thats already been violated so feel free to talk whatever ********** you guys would like to.....
So here is the thread to start... ill only have my pics up next week...(still need to collect my kit and install)
I think we should all start posting pics of our watercooled setups? *edit* only pics please and comments... but thats already been violated so feel free to talk whatever ********** you guys would like to.....
So here is the thread to start... ill only have my pics up next week...(still need to collect my kit and install)
Last edited by Firestrm_ZA on 11 Apr 2008, 12:15, edited 1 time in total.
https://carbonite.co.za - CUD central
Will post soon, didnt realise the fitting, priming and case modding was such a job. Fun though
Intel Core 2 Duo E8400 @ 4050Ghz
Asus Striker II Formula
4GB Transcend AxeRam DDR2 1066+ @ 1200mhz
2 x XFX 8800GT XXX Alpha Dog SLI
AeroCool Horsepower 1020W PSU
Seagate 320GB SATA 16Mb
CoolMaster Stacker 830 nVidia Edition
Swifttech H20 Apexi Ultra+ on CPU/SLI
Samsung 22"
Asus Striker II Formula
4GB Transcend AxeRam DDR2 1066+ @ 1200mhz
2 x XFX 8800GT XXX Alpha Dog SLI
AeroCool Horsepower 1020W PSU
Seagate 320GB SATA 16Mb
CoolMaster Stacker 830 nVidia Edition
Swifttech H20 Apexi Ultra+ on CPU/SLI
Samsung 22"
-
- Registered User
- Posts: 12310
- Joined: 28 Nov 2005, 02:00
- Location: That other place
- Contact:
- Firestrm_ZA
- Deliciously Moist Cake
- Posts: 16650
- Joined: 13 Mar 2008, 02:00
- Processor: AMD Ryzen 7 5950X
- Motherboard: ROG Strix B550-F Gaming
- Graphics card: EVGA 3080Ti XC3 Ultra
- Memory: 32GB 3600 G-Skill Trident Z RGB
SKIDD. that is one wicked setup bro .... big ups for the pics...
https://carbonite.co.za - CUD central
-
- Permanently Banned
- Posts: 167
- Joined: 28 Jun 2007, 02:00
-
- Registered User
- Posts: 12310
- Joined: 28 Nov 2005, 02:00
- Location: That other place
- Contact:
lol ettiene you bum..showing off:P oh here's my uber-world-class monster rig says ettiene
AMD FX 8120 @4.7Ghz |Antec Kuhler 920 |ASUS Sabertooth 990fx| 16Gb DDR3 1866 Vengeance|GTX 460 1gb |OCZ Vertex 3 60gb (OS) + HyperX 240Gb (Games)|2tb+320gb+250gb(x3)+160gb hdds| CM Silent Pro Gold 1000w| Aerocool Strike X ST| Dell 23" LED LCD |Windows 8 Pro x64
-
- Registered User
- Posts: 12310
- Joined: 28 Nov 2005, 02:00
- Location: That other place
- Contact:
lol but I mean the case..lol a gift from above
AMD FX 8120 @4.7Ghz |Antec Kuhler 920 |ASUS Sabertooth 990fx| 16Gb DDR3 1866 Vengeance|GTX 460 1gb |OCZ Vertex 3 60gb (OS) + HyperX 240Gb (Games)|2tb+320gb+250gb(x3)+160gb hdds| CM Silent Pro Gold 1000w| Aerocool Strike X ST| Dell 23" LED LCD |Windows 8 Pro x64
Dae , dude . you will always be the modding king .................. but , skidd that is the coolest looking rig I have ever seen. If you ever sell , talk to me . 5star dude
Asus Rampage Formula : E8400@4000 : 4GB Mushkin Frostbite @1066/5.5.5.15/TRD6
Sapphire 4870 Toxic 1GB: Coolermaster HAF : BlackIce360 Rad : Apogee GT : DTek-Customs Rez.
Sapphire 4870 Toxic 1GB: Coolermaster HAF : BlackIce360 Rad : Apogee GT : DTek-Customs Rez.
-
- Registered User
- Posts: 12310
- Joined: 28 Nov 2005, 02:00
- Location: That other place
- Contact:
Heres my WIP. Will complete it this weekend.
Swifttech H20 Apex Ultra+
[/img]
Swifttech H20 Apex Ultra+
[/img]
Intel Core 2 Duo E8400 @ 4050Ghz
Asus Striker II Formula
4GB Transcend AxeRam DDR2 1066+ @ 1200mhz
2 x XFX 8800GT XXX Alpha Dog SLI
AeroCool Horsepower 1020W PSU
Seagate 320GB SATA 16Mb
CoolMaster Stacker 830 nVidia Edition
Swifttech H20 Apexi Ultra+ on CPU/SLI
Samsung 22"
Asus Striker II Formula
4GB Transcend AxeRam DDR2 1066+ @ 1200mhz
2 x XFX 8800GT XXX Alpha Dog SLI
AeroCool Horsepower 1020W PSU
Seagate 320GB SATA 16Mb
CoolMaster Stacker 830 nVidia Edition
Swifttech H20 Apexi Ultra+ on CPU/SLI
Samsung 22"
I have a question regarding the barbs, when I tightened them I hand tightened them as much as I could then turned them in about 2 turns with a spanner. Is that too much and I rish damaging the O-ring?
Intel Core 2 Duo E8400 @ 4050Ghz
Asus Striker II Formula
4GB Transcend AxeRam DDR2 1066+ @ 1200mhz
2 x XFX 8800GT XXX Alpha Dog SLI
AeroCool Horsepower 1020W PSU
Seagate 320GB SATA 16Mb
CoolMaster Stacker 830 nVidia Edition
Swifttech H20 Apexi Ultra+ on CPU/SLI
Samsung 22"
Asus Striker II Formula
4GB Transcend AxeRam DDR2 1066+ @ 1200mhz
2 x XFX 8800GT XXX Alpha Dog SLI
AeroCool Horsepower 1020W PSU
Seagate 320GB SATA 16Mb
CoolMaster Stacker 830 nVidia Edition
Swifttech H20 Apexi Ultra+ on CPU/SLI
Samsung 22"
- Firestrm_ZA
- Deliciously Moist Cake
- Posts: 16650
- Joined: 13 Mar 2008, 02:00
- Processor: AMD Ryzen 7 5950X
- Motherboard: ROG Strix B550-F Gaming
- Graphics card: EVGA 3080Ti XC3 Ultra
- Memory: 32GB 3600 G-Skill Trident Z RGB
hey mike, good to see ya... thanks for the kit bro... did some test fitting last night.... woot.... drill and prep tomorrow... haha...
anyways o/t as far as the tightening goes.... that fine... if you read the manual it tells you to tighten till its tight then another quarter or half turn... i tightened mine in till i couldn't turn any more by hand then slowly turned with a spanner till i could feel heavy resisitance....
anyways o/t as far as the tightening goes.... that fine... if you read the manual it tells you to tighten till its tight then another quarter or half turn... i tightened mine in till i couldn't turn any more by hand then slowly turned with a spanner till i could feel heavy resisitance....
https://carbonite.co.za - CUD central
Pleasure Firestrm
Well I hope it hasnt damaged the o-ring coz then its bound to leak now or at a later stage.
But anyway, I just need to prime my system now and its all done
Well I hope it hasnt damaged the o-ring coz then its bound to leak now or at a later stage.
But anyway, I just need to prime my system now and its all done
Intel Core 2 Duo E8400 @ 4050Ghz
Asus Striker II Formula
4GB Transcend AxeRam DDR2 1066+ @ 1200mhz
2 x XFX 8800GT XXX Alpha Dog SLI
AeroCool Horsepower 1020W PSU
Seagate 320GB SATA 16Mb
CoolMaster Stacker 830 nVidia Edition
Swifttech H20 Apexi Ultra+ on CPU/SLI
Samsung 22"
Asus Striker II Formula
4GB Transcend AxeRam DDR2 1066+ @ 1200mhz
2 x XFX 8800GT XXX Alpha Dog SLI
AeroCool Horsepower 1020W PSU
Seagate 320GB SATA 16Mb
CoolMaster Stacker 830 nVidia Edition
Swifttech H20 Apexi Ultra+ on CPU/SLI
Samsung 22"
Yip, Resovoir is up near the top of the case, and pump sits on the base at the bottom. Just havent connected the Res and Pump up in the pic.
Intel Core 2 Duo E8400 @ 4050Ghz
Asus Striker II Formula
4GB Transcend AxeRam DDR2 1066+ @ 1200mhz
2 x XFX 8800GT XXX Alpha Dog SLI
AeroCool Horsepower 1020W PSU
Seagate 320GB SATA 16Mb
CoolMaster Stacker 830 nVidia Edition
Swifttech H20 Apexi Ultra+ on CPU/SLI
Samsung 22"
Asus Striker II Formula
4GB Transcend AxeRam DDR2 1066+ @ 1200mhz
2 x XFX 8800GT XXX Alpha Dog SLI
AeroCool Horsepower 1020W PSU
Seagate 320GB SATA 16Mb
CoolMaster Stacker 830 nVidia Edition
Swifttech H20 Apexi Ultra+ on CPU/SLI
Samsung 22"
-
- Registered User
- Posts: 12310
- Joined: 28 Nov 2005, 02:00
- Location: That other place
- Contact:
Not the end of the word though. That pump is strong enough that you can put it pretty much anywhere in pretty much any orientation and it'll be fine. Mine in Epiphany is at the top of the case, at a 90 degree angle:
And even there it has NO problems pushing a hell of a lot of water.
And even there it has NO problems pushing a hell of a lot of water.
That guy that used to mod cases. Now I take photos. True story.
Skidd thanks for the suggestions.
I am not 100% sure what you mean though. The pump is gonna stay how it is in the pic, the res connects to inlet which is horizantal and the outlet which is vertical will pump to the 1st Gfx card. How else could I position the pump?
I am not 100% sure what you mean though. The pump is gonna stay how it is in the pic, the res connects to inlet which is horizantal and the outlet which is vertical will pump to the 1st Gfx card. How else could I position the pump?
Intel Core 2 Duo E8400 @ 4050Ghz
Asus Striker II Formula
4GB Transcend AxeRam DDR2 1066+ @ 1200mhz
2 x XFX 8800GT XXX Alpha Dog SLI
AeroCool Horsepower 1020W PSU
Seagate 320GB SATA 16Mb
CoolMaster Stacker 830 nVidia Edition
Swifttech H20 Apexi Ultra+ on CPU/SLI
Samsung 22"
Asus Striker II Formula
4GB Transcend AxeRam DDR2 1066+ @ 1200mhz
2 x XFX 8800GT XXX Alpha Dog SLI
AeroCool Horsepower 1020W PSU
Seagate 320GB SATA 16Mb
CoolMaster Stacker 830 nVidia Edition
Swifttech H20 Apexi Ultra+ on CPU/SLI
Samsung 22"
Aah ok
Might actually do that, thanks!
Might actually do that, thanks!
Intel Core 2 Duo E8400 @ 4050Ghz
Asus Striker II Formula
4GB Transcend AxeRam DDR2 1066+ @ 1200mhz
2 x XFX 8800GT XXX Alpha Dog SLI
AeroCool Horsepower 1020W PSU
Seagate 320GB SATA 16Mb
CoolMaster Stacker 830 nVidia Edition
Swifttech H20 Apexi Ultra+ on CPU/SLI
Samsung 22"
Asus Striker II Formula
4GB Transcend AxeRam DDR2 1066+ @ 1200mhz
2 x XFX 8800GT XXX Alpha Dog SLI
AeroCool Horsepower 1020W PSU
Seagate 320GB SATA 16Mb
CoolMaster Stacker 830 nVidia Edition
Swifttech H20 Apexi Ultra+ on CPU/SLI
Samsung 22"