[FS?] Modding Scrap

Off-The-Chart · Post by **Off-The-Chart** » 10 Aug 2007, 10:07

Ok pls mod do not move this... Yes it is somewhat a "For Sale" thread but getting PM's as certain stuff and this way everyone can see what has already been asked for...

NOTE: ALL STUFF WILL HAVE WRITTEN IF IT STILL WORKS OR NOT, UNLESS NOT SURE...

bunch of DVD/CD drives, 1 or 2 hdd's, stiffy drives and really old mobo's:
(do not count on these working)
http://www.charts-zone.co.za/Files/Stuff/DSCF0733.jpg

Dremel with some stuff:
(still works)
http://www.charts-zone.co.za/Files/Stuff/DSCF0735.jpg
http://www.charts-zone.co.za/Files/Stuff/DSCF0740.jpg

Jigsaw:
(still working hardly used)
http://www.charts-zone.co.za/Files/Stuff/DSCF0736.jpg

Old PSU's:
(might still work but no guarantee)
http://www.charts-zone.co.za/Files/Stuff/DSCF0739.jpg

MS Sidewinder:
(this will still work though I think MS discontinued support on it)
http://www.charts-zone.co.za/Files/Stuff/DSCF0741.jpg

Few actual modding goods:
http://www.charts-zone.co.za/Files/Stuff/DSCF0743.jpg

2 of these:
(do not work)
http://www.charts-zone.co.za/Files/Stuff/DSCF0744.jpg
http://www.charts-zone.co.za/Files/Stuff/DSCF0746.jpg

Some more modding things:
http://www.charts-zone.co.za/Files/Stuff/DSCF0747.jpg
http://www.charts-zone.co.za/Files/Stuff/DSCF0748.jpg
http://www.charts-zone.co.za/Files/Stuff/DSCF0749.jpg

5 Old side panels:
http://www.charts-zone.co.za/Files/Stuff/DSCF0750.jpg

Ok so I put this here cause these things are really more for those of you who like to mod and would like test subjects...

I know asking a price for this stuff is not really good since they are all either not working or old, but if I can get something for the Jigsaw and the Dremel and it a nice price I can just as well chuck in the rest of the stuff if that person wants it...

I am in PTA so someone close would be best...

DAE_JA_VOO · Post by **DAE_JA_VOO** » 10 Aug 2007, 10:24

I'll take the dremmel!

viceroy · Post by **viceroy** » 10 Aug 2007, 10:52

Dae...you got too much modding tools already...give other a chance

OTC...how much you looking for, for the dremel and Jigsaw?

Samaya · Post by **Samaya** » 10 Aug 2007, 11:21

Do those really old mobo's still work? Or would that be wishful thinking...

Off-The-Chart · Post by **Off-The-Chart** » 10 Aug 2007, 11:50

@vice would have liked bout R600 for both and then could choose from other stuff as well...

nah Sam, think that would be wishful thinking... but hey, you take it for free what can you lose if they don't...

let's say I would have been happy with 1 guy taking everything for R700...

(that is wishful thinking)

Futs · Post by **Futs** » 10 Aug 2007, 13:58

You can send the TT PSUs to DAE as a parting gift

viceroy · Post by **viceroy** » 10 Aug 2007, 14:01

LOL

I'm sure Dae could come up with some pretty creative ways to expire those TT's from existance

Off-The-Chart · Post by **Off-The-Chart** » 10 Aug 2007, 14:38

well they do not work which I was gonna see if I can fix, but apart from that, they have got the nice black covers, sleeving, fans and then the PSU connectors...

ooo and vice got dibs on the Dremel and Jig

he just wants to double check with Mrs Finance and then will let me know...

viceroy · Post by **viceroy** » 10 Aug 2007, 14:45

LOL...nice way of putting it OTC

If the Minister of Finance gives the go ahead, i'll most likely take some of the other stuff too...can't say everything cos I'm already in trouble for having junk in the house

Will let you know asap

DoOb · Post by **DoOb** » 10 Aug 2007, 15:26

Actually ya i would have been ampt for the dremel aswell. For the less fortunate guys.

EDIT: Nice one Vice hehehe

DAE_JA_VOO · Post by **DAE_JA_VOO** » 10 Aug 2007, 16:16

Hold on a sec, how the hell does viceroy have dibs on the dremmel? If i read correctly, i had the first post here, and i PMed you right then too

No offense to you of course Viceroy

The only thing those TT PSU would be good for is for throwing at people you dont like

viceroy · Post by **viceroy** » 10 Aug 2007, 16:19

Dae...It's because I'll take the whole lot in one go if go ahead.

I did tell him that if he sells the stuff before I come back to him (most likely tomorrow) he's more than welcome to

Off-The-Chart · Post by **Off-The-Chart** » 10 Aug 2007, 16:20

DAE, are you serious you do not have a dremel?

wasn't it you I asked how much you got yours for?

if not then damn, my bad... then you have dibs on it...

soz for that then vice but then the jig can go for R300 and you can pick what you want from other stuff...

viceroy · Post by **viceroy** » 10 Aug 2007, 16:21

I'm actually more interested in the Dremmel...but if Dae wants, sell to him

DAE_JA_VOO · Post by **DAE_JA_VOO** » 10 Aug 2007, 16:24

No OTC, i never said i dont have a dremel. I do have one, but not an original Dremel.

But whatever, it's yours viceroy. If you dont have one, you can have this one. HOWEVER, if you do have one, this one's MINE!

viceroy · Post by **viceroy** » 10 Aug 2007, 16:26

LOL...I don't have one, not even a knockoff...but you did have dibs...I'm still not certain of getting it...so if you want it go for it...you'll be doing more modding with it than I ever will...

WiK1d · Post by **WiK1d** » 10 Aug 2007, 16:27

And I was the one who asked for it first on MSN yesterday

Off-The-Chart · Post by **Off-The-Chart** » 10 Aug 2007, 16:27

rofl,

see I only said dibs to vice cause I knew you had something like a dremel... would obviously like to help us "sponsorless" guys out...

so, you 2 gonna duke it out?

*gets popcorn and beers ready*

viceroy · Post by **viceroy** » 10 Aug 2007, 16:28

Can't you see us already at it

"you take it"
"no you take it"
"no you take it!"
"NO you take it!!"
"NO YOU TAKE IT!!!"

DAE_JA_VOO · Post by **DAE_JA_VOO** » 10 Aug 2007, 16:30

This is the way i think we should handle this.

Wikid doesn't count. I dunno why, but he just doesn't.

So, viceroy is first in line. If he wants it, he takes it. After him it's me.

LOL!!!! Just kidding

1: Wik
2: Viceroy
3: Me

So, if wik doesn't take it, it goes to viceroy, if HE doesn't take it, i will.

Off-The-Chart · Post by **Off-The-Chart** » 10 Aug 2007, 16:32

rofl W1k that bewb...

he pulling legs... you mos know he likes doing that...

he is trying to get me back for putting him with 75m of AWG wiring...

it is just:
1. vice
2. DAE

DAE_JA_VOO · Post by **DAE_JA_VOO** » 10 Aug 2007, 16:33

Okay well then Vice it's up to you. You dont have a dremel, so you should take this one. I already have one

BTW:

I need to post this somewhere, so i'm doing it here where there's a lot of activity

I just finished watercooling a MONSTER PC. Q6600, 8800Ultra type of monster. It was nice

Off-The-Chart · Post by **Off-The-Chart** » 10 Aug 2007, 16:35

damn, that must have been hectic but fun...

you test running it?

WiK1d · Post by **WiK1d** » 10 Aug 2007, 16:35

OI! What the hell! Who said I'm pulling a leg or three?

I'm just between two minds, I'm busy saving, but my current Enhell Dremel is dying, and and

This sucks

DAE_JA_VOO · Post by **DAE_JA_VOO** » 10 Aug 2007, 16:37

Off-The-Chart wrote:you test running it?

I did now now, no leaks at all, and it's working 100%. It's gonna be at my house till MONDAY!

Anyway, my dremel is dying too bertus.... sucks dude