Just got my new pc, e6600, 8800gts, 2g ddr 2 800 and the Gigabyte DS4 motherboard.
My problem is, I have 5 Sata HD's
3x160GB Sata
1x120GB Sata II
1x250GB Sata II
I'v tried everything I can think of, but windowns wont detect the hd's. They show on the post, but windows doesnt detect them even after I installed a raid driver.
Any ideas?
DS4 Sata problems
DS4 Sata problems
E6600@2.9GHz, Asus8800 GTS, 2x2GB
Patriot DDR2 4-4-4-12 @ 900MHz
-
- Registered User
- Posts: 398
- Joined: 14 Nov 2006, 02:00
- Location: Space.
- Contact:
Seems all I had to do is get the new bios version
but I have a new question,
I have 2x160gb in Raid0
how do I set it up so the new pc picks up the raid?
atm it only shows the drives but I cant access them.
Corsair TwinX XMS 1Gb modules
but I have a new question,
I have 2x160gb in Raid0
how do I set it up so the new pc picks up the raid?
atm it only shows the drives but I cant access them.
Corsair TwinX XMS 1Gb modules
E6600@2.9GHz, Asus8800 GTS, 2x2GB
Patriot DDR2 4-4-4-12 @ 900MHz
I only setup raid once. This is what i done.I have 2x160gb in Raid0
how do I set it up so the new pc picks up the raid?
1.Enabled raid in bios
2.Configured the raid on boot up.
3.Installed Win Xp and 2 minutes into the setup you have to press some button (can't remember) , then you configure the raid by inserting the raid stiffy disk and then comtinue installing windows.
4. Completed the installation as normal and done.
-
- G3AR Staff Member
- Posts: 5790
- Joined: 08 Mar 2003, 02:00
- Location: PCFormat HQ
- Contact:
Try this software.
Here : http://www.unformat-unerase.com/#2R-Studio unformat tool can analyze and unerase data from software RAIDs and volume or stripe sets. R-Studio detects and processes hardware RAIDs and volume or stripe sets like regular drives/volumes.