Overclock...

DarkRanger · Post by **DarkRanger** » 19 Oct 2006, 09:05

Can you put them in a ZIP and send them to me somehow? PLZ!

Molean · Post by **Molean** » 19 Oct 2006, 09:11

DarkRanger wrote:Can you put them in a ZIP and send them to me somehow? PLZ!

I can, but will prob only be able to do it on the weekend. As my stupid work had been capped and I can only browse local sites

PM me your email address.

Sickwacky · Post by **Sickwacky** » 19 Oct 2006, 09:12

Molean wrote:the click Web archive *.mht you can then proceed to save every web page.

make a .mth file you say

What kind of temps are you guys getting? Coz, It seems those i've seen are a tad on the hot-side...

Say it like this:
(*mine*)

Idle : 24'C
Load : 45'C

3800+ Dualie at 2.4Ghz~2.6GHz, at 2.7+ it's about 6'C higher

highest speed i've went 2.8GHz

DarkRanger · Post by **DarkRanger** » 19 Oct 2006, 09:17

Its ok! My work uses uncapped 1024 ADSL... Nice...

Molean · Post by **Molean** » 19 Oct 2006, 09:19

Sickwacky wrote:
Molean wrote:the click Web archive *.mht you can then proceed to save every web page.

make a .mth file you say

No, *.mht

DarkRanger · Post by **DarkRanger** » 19 Oct 2006, 09:20

How do you get that signature thingy?? I'm trying to make mine work but i cant!!! hehe...

Oja, ek weet dies of topic, but im sure u guys dont care!!

Molean · Post by **Molean** » 19 Oct 2006, 09:20

DarkRanger wrote:Its ok! My work uses uncapped 1024 ADSL... Nice...

DAM YOU!

LOL, why not just save it yourself then? It just take a bit of time, is all.

Molean · Post by **Molean** » 19 Oct 2006, 09:21

DarkRanger wrote:How do you get that signature thingy?? I'm trying to make mine work but i cant!!! hehe...

Oja, ek weet dies of topic, but im sure u guys dont care!!

Go to your profile at the top of the page. You can create and edit it there.

DarkRanger · Post by **DarkRanger** » 19 Oct 2006, 09:28

I did that, i typed this

but it doesn't work... IT DOESNT EVEN SHOW!!!

Hman · Post by **Hman** » 19 Oct 2006, 09:48

I saw last night that it's not my memory holding me back, it's a BIOS limitation.

But I got my memory to run at 500Mhz DDR at CAS 3.

But wich is better 415Mhz at CAS 2.5 or 500Mhz at CAS 3, I think the latter as there shouldnn't be much difference in 0.5 of a clock cycle.

DarkRanger · Post by **DarkRanger** » 19 Oct 2006, 09:52

Hman wrote:I saw last night that it's not my memory holding me back, it's a BIOS limitation. But I got my memory to run at 500Mhz DDR at CAS 3. But wich is better 415Mhz at CAS 2.5 or 500Mhz at CAS 3, I think the latter as there shouldnn't be much difference in 0.5 of a clock cycle.

Uhm... MOLEAN!!! WE NEED YOUR HELP!!!!

Hman · Post by **Hman** » 19 Oct 2006, 09:57

I see you cam right with your sig, but put in "Please visit this thread", not forum

DarkRanger · Post by **DarkRanger** » 19 Oct 2006, 10:01

Hman wrote:I see you cam right with your sig, but put in "Please visit this thread", not forum

Like that??

Molean · Post by **Molean** » 19 Oct 2006, 10:09

Hman wrote:I saw last night that it's not my memory holding me back, it's a BIOS limitation. But I got my memory to run at 500Mhz DDR at CAS 3. But wich is better 415Mhz at CAS 2.5 or 500Mhz at CAS 3, I think the latter as there shouldnn't be much difference in 0.5 of a clock cycle.

It shouldn't make a big difference. But to really see, Run Pcmark 04 memory benchmark. Restart your PC after every benchmark to get a proper score.

Hman · Post by **Hman** » 19 Oct 2006, 10:15

Yes, mucho grande

Molean · Post by **Molean** » 19 Oct 2006, 10:34

Hman wrote:Yes, mucho grande

No problemo

I'm gonna try loosen my ram timings tonite to see if that will help my OC.

Hman · Post by **Hman** » 19 Oct 2006, 10:50

Also with that guide you posted, look at the introduction page, at the bottom you'll see a button labeled "print", click it and it'll load a nice printable page. Then simply save that to a file, or print it out.

Again, all your base are belong to me!

Cupis · Post by **Cupis** » 19 Oct 2006, 12:59

lol

now wait been reading

CAS 3

WTF is CAS?

and molean that 49 degrees idle that is hot man!!!! for new amd chips ???

i don't know why you say not bad... that going to run at like 55 - 60 under good old stress???? that a little high???

in my opinion... better cooling then yes i agree!!!

Molean · Post by **Molean** » 19 Oct 2006, 13:12

Cupis wrote:lol

now wait been reading
CAS 3
WTF is CAS?

and molean that 49 degrees idle that is hot man!!!! for new amd chips ???

i don't know why you say not bad... that going to run at like 55 - 60 under good old stress???? that a little high???

in my opinion... better cooling then yes i agree!!!

Hey Cupis.

It might not reach those temps under load. And Remember it's being OC'd thats why the temps are that high. But anyways, Cas has got to do with you ram timings EG 2-2-2-5 Cas is the first number.

Cupis · Post by **Cupis** » 19 Oct 2006, 14:52

true but damn in my opinion that is still high.... this new amd... the cool amd ... nmot the hot amd????

that is high??? my HT was idle 45 went to 55 when i played games.....

not stock cooler if you rem??

Molean · Post by **Molean** » 19 Oct 2006, 14:59

Cupis wrote:true but damn in my opinion that is still high.... this new amd... the cool amd ... nmot the hot amd????

that is high??? my HT was idle 45 went to 55 when i played games.....

not stock cooler if you rem??

Bru it's being OCed by 600Mhz, and it is a stock cooler. Also we don't know what DarkRanger's case setup is like. You can also take the weather into consideration. My CPU was idling at at 33 degrees this morning. MINES the new "cool" AMD as you put it and it runs cool.

Hman · Post by **Hman** » 19 Oct 2006, 15:05

I wouldn't run that oc if my cpu got that hot, I have heard of dual core AMD's dying at 65 degrees. I'd rather clock back a little, then get a new cooler. Then I'd push the clock again. I'd suggest he take his cpu multiplier down to 11.

Molean · Post by **Molean** » 19 Oct 2006, 15:09

Hman wrote:I wouldn't run that oc if my cpu got that hot, I have heard of dual core AMD's dying at 65 degrees. I'd rather clock back a little, then get a new cooler. Then I'd push the clock again. I'd suggest he take his cpu multiplier down to 11.

Yeah fair enough. But he is'nt running a dual core. I would just go get a new cooler.

DarkRanger · Post by **DarkRanger** » 19 Oct 2006, 15:36

Molean wrote:
Cupis wrote:true but damn in my opinion that is still high.... this new amd... the cool amd ... nmot the hot amd????

that is high??? my HT was idle 45 went to 55 when i played games.....

not stock cooler if you rem??
Bru it's being OCed by 600Mhz, and it is a stock cooler. Also we don't know what DarkRanger's case setup is like. You can also take the weather into consideration. My CPU was idling at at 33 degrees this morning. MINES the new "cool" AMD as you put it and it runs cool.

My case is under my table in some kind of "enclosure". Like those pc Desk stands. yesterdays temp was about 36C outside, and my case only has 2 fans. So all the heat it blows out is most probably taken back in because of the enclosure.

But im building a small heatsink ive been working on very long. Dont want to go into details otherwize the idea gets hijacked agen. If i get succes with that heatsink, ill let you guys know...

Off-topic PS: It's so damn hard getting the Nokia N80... I've been waiting a week now...

Molean · Post by **Molean** » 19 Oct 2006, 15:44

DarkRanger wrote:
Molean wrote:
Cupis wrote:true but damn in my opinion that is still high.... this new amd... the cool amd ... nmot the hot amd????

that is high??? my HT was idle 45 went to 55 when i played games.....

not stock cooler if you rem??
Bru it's being OCed by 600Mhz, and it is a stock cooler. Also we don't know what DarkRanger's case setup is like. You can also take the weather into consideration. My CPU was idling at at 33 degrees this morning. MINES the new "cool" AMD as you put it and it runs cool.
My case is under my table in some kind of "enclosure". Like those pc Desk stands. yesterdays temp was about 36C outside, and my case only has 2 fans. So all the heat it blows out is most probably taken back in because of the enclosure.

But im building a small heatsink ive been working on very long. Dont want to go into details otherwize the idea gets hijacked agen. If i get succes with that heatsink, ill let you guys know...

Off-topic PS: It's so damn hard getting the Nokia N80... I've been waiting a week now...

8O Some kind of enclosure? LOL.

Rip it out of there and put it on your desk dammit!

Also open up you PC and try clean out the dust. I hadn't cleaned my PC for about 3 months, blew all the dust out the other day and the temp dropped 10 Degrees off my CPU.

Mmm insterested to hear about this "heatsink" of yours