Watercooling Setups - Advice and pics here
- Firestrm_ZA
- Deliciously Moist Cake
- Posts: 16644
- Joined: 13 Mar 2008, 02:00
- Processor: AMD Ryzen 7 5950X
- Motherboard: ROG Strix B550-F Gaming
- Graphics card: EVGA 3080Ti XC3 Ultra
- Memory: 32GB 3600 G-Skill Trident Z RGB
@ 3.6 ghz im running full load under prime95 small fft test @ 42 degrees and the fans on the wc raddy are running at their lowest rpmMow wrote:Firestrm wrote:wahahaha im getting those same temps @ 3.6ghz... but still running the ultra in... will be posting pics in the next few min.... *edit* photobucket is sooo sloooowwww...Mow wrote:Guys spoke to david. He has no more stock of the Apex Ultra + . But he had 2 Ultra's left. So I said i would take one . Have a g80 anyway and I figured I would source a northbridge cooler elsewere ( locally I hope ). Any reccomendation on a locally available chipset cooler ....
@ firestorm.
Dude , not really jacking your thread , as next week this time i will have a rig to post.
Daft question, what kind of thermal performance can i expect ? Im currently idling 29-32 and maxing @ aroung 50 C. Will there be a noteworty increase in performance ?
Dude what are your load temps ?
https://carbonite.co.za - CUD central
- Firestrm_ZA
- Deliciously Moist Cake
- Posts: 16644
- Joined: 13 Mar 2008, 02:00
- Processor: AMD Ryzen 7 5950X
- Motherboard: ROG Strix B550-F Gaming
- Graphics card: EVGA 3080Ti XC3 Ultra
- Memory: 32GB 3600 G-Skill Trident Z RGB
been awhile now mike, where's the pics bro...MadMike wrote:Firestrm looks awesome.
Just got home, finishing mine now and will post pics. Then 4.5 ghz
https://carbonite.co.za - CUD central
All finished.
Case
Cooling
Front Panel off with Res
Cant fit my side panel on that has the 4 x 120mm fans. Oh well.
Case
Cooling
Front Panel off with Res
Cant fit my side panel on that has the 4 x 120mm fans. Oh well.
Intel Core 2 Duo E8400 @ 4050Ghz
Asus Striker II Formula
4GB Transcend AxeRam DDR2 1066+ @ 1200mhz
2 x XFX 8800GT XXX Alpha Dog SLI
AeroCool Horsepower 1020W PSU
Seagate 320GB SATA 16Mb
CoolMaster Stacker 830 nVidia Edition
Swifttech H20 Apexi Ultra+ on CPU/SLI
Samsung 22"
Asus Striker II Formula
4GB Transcend AxeRam DDR2 1066+ @ 1200mhz
2 x XFX 8800GT XXX Alpha Dog SLI
AeroCool Horsepower 1020W PSU
Seagate 320GB SATA 16Mb
CoolMaster Stacker 830 nVidia Edition
Swifttech H20 Apexi Ultra+ on CPU/SLI
Samsung 22"
-
- Registered User
- Posts: 12310
- Joined: 28 Nov 2005, 02:00
- Location: That other place
- Contact:
EDIT: double post
Last edited by DAE_JA_VOO on 14 Apr 2008, 08:13, edited 1 time in total.
That guy that used to mod cases. Now I take photos. True story.
-
- Registered User
- Posts: 12310
- Joined: 28 Nov 2005, 02:00
- Location: That other place
- Contact:
DAE_JA_VOO, to be honest I dont have the patience to try fit the thing inside the case. Was going to mount it in the front where the green led 120 is but just went for the easiest option
Intel Core 2 Duo E8400 @ 4050Ghz
Asus Striker II Formula
4GB Transcend AxeRam DDR2 1066+ @ 1200mhz
2 x XFX 8800GT XXX Alpha Dog SLI
AeroCool Horsepower 1020W PSU
Seagate 320GB SATA 16Mb
CoolMaster Stacker 830 nVidia Edition
Swifttech H20 Apexi Ultra+ on CPU/SLI
Samsung 22"
Asus Striker II Formula
4GB Transcend AxeRam DDR2 1066+ @ 1200mhz
2 x XFX 8800GT XXX Alpha Dog SLI
AeroCool Horsepower 1020W PSU
Seagate 320GB SATA 16Mb
CoolMaster Stacker 830 nVidia Edition
Swifttech H20 Apexi Ultra+ on CPU/SLI
Samsung 22"
-
- Registered User
- Posts: 12310
- Joined: 28 Nov 2005, 02:00
- Location: That other place
- Contact:
- Firestrm_ZA
- Deliciously Moist Cake
- Posts: 16644
- Joined: 13 Mar 2008, 02:00
- Processor: AMD Ryzen 7 5950X
- Motherboard: ROG Strix B550-F Gaming
- Graphics card: EVGA 3080Ti XC3 Ultra
- Memory: 32GB 3600 G-Skill Trident Z RGB
Nice Mike, looking good, i agree with Skidd. mount that raddy on the bottom... but otherwise looking good dude
https://carbonite.co.za - CUD central
Guys , I decided against buying the kit. Did some heavy testing over the weekend. My load temps running everest stability for 3 hours is 44C. I cant seem to get my CPU running anywhere higher than 3.5 so its seems redundant.
Asus Rampage Formula : E8400@4000 : 4GB Mushkin Frostbite @1066/5.5.5.15/TRD6
Sapphire 4870 Toxic 1GB: Coolermaster HAF : BlackIce360 Rad : Apogee GT : DTek-Customs Rez.
Sapphire 4870 Toxic 1GB: Coolermaster HAF : BlackIce360 Rad : Apogee GT : DTek-Customs Rez.
- Firestrm_ZA
- Deliciously Moist Cake
- Posts: 16644
- Joined: 13 Mar 2008, 02:00
- Processor: AMD Ryzen 7 5950X
- Motherboard: ROG Strix B550-F Gaming
- Graphics card: EVGA 3080Ti XC3 Ultra
- Memory: 32GB 3600 G-Skill Trident Z RGB
wat bios revision are you using on your board?Mow wrote:Guys , I decided against buying the kit. Did some heavy testing over the weekend. My load temps running everest stability for 3 hours is 44C. I cant seem to get my CPU running anywhere higher than 3.5 so its seems redundant.
https://carbonite.co.za - CUD central
- Firestrm_ZA
- Deliciously Moist Cake
- Posts: 16644
- Joined: 13 Mar 2008, 02:00
- Processor: AMD Ryzen 7 5950X
- Motherboard: ROG Strix B550-F Gaming
- Graphics card: EVGA 3080Ti XC3 Ultra
- Memory: 32GB 3600 G-Skill Trident Z RGB
agreed DAE, i wished i had the space to put it inside my case... lolDAE_JA_VOO wrote:Aah come one Mike. Some effort man, some effort. Have you any idea how much better that machine of yours would look if that raddy wasn't hanging off the back?
https://carbonite.co.za - CUD central
1302 - There is one later version I think , but it just adds 45nm support. I had it running 3.6 on an older version though. I'll invest in WC ( Import ) with my next upgrade in December.
Asus Rampage Formula : E8400@4000 : 4GB Mushkin Frostbite @1066/5.5.5.15/TRD6
Sapphire 4870 Toxic 1GB: Coolermaster HAF : BlackIce360 Rad : Apogee GT : DTek-Customs Rez.
Sapphire 4870 Toxic 1GB: Coolermaster HAF : BlackIce360 Rad : Apogee GT : DTek-Customs Rez.
- Firestrm_ZA
- Deliciously Moist Cake
- Posts: 16644
- Joined: 13 Mar 2008, 02:00
- Processor: AMD Ryzen 7 5950X
- Motherboard: ROG Strix B550-F Gaming
- Graphics card: EVGA 3080Ti XC3 Ultra
- Memory: 32GB 3600 G-Skill Trident Z RGB
run with the 1203 bios its better for oc'ing on the pn32e-sli... as far as i have seen, lolMow wrote:1302 - There is one later version I think , but it just adds 45nm support. I had it running 3.6 on an older version though. I'll invest in WC ( Import ) with my next upgrade in December.
https://carbonite.co.za - CUD central
- Firestrm_ZA
- Deliciously Moist Cake
- Posts: 16644
- Joined: 13 Mar 2008, 02:00
- Processor: AMD Ryzen 7 5950X
- Motherboard: ROG Strix B550-F Gaming
- Graphics card: EVGA 3080Ti XC3 Ultra
- Memory: 32GB 3600 G-Skill Trident Z RGB
Skidd wrote:Dude its called "Modding"Firestrm wrote:agreed DAE, i wished i had the space to put it inside my case... lolDAE_JA_VOO wrote:Aah come one Mike. Some effort man, some effort. Have you any idea how much better that machine of yours would look if that raddy wasn't hanging off the back?
Make a plan!
SKIDD, i have no space... take a look at the pics of my setup... advise a place???
https://carbonite.co.za - CUD central
Yea , it is , but then i cant get my memmory to run dual channel. ( this is thread jacking).Firestrm wrote:run with the 1203 bios its better for oc'ing on the pn32e-sli... as far as i have seen, lolMow wrote:1302 - There is one later version I think , but it just adds 45nm support. I had it running 3.6 on an older version though. I'll invest in WC ( Import ) with my next upgrade in December.
Enjoy.
Asus Rampage Formula : E8400@4000 : 4GB Mushkin Frostbite @1066/5.5.5.15/TRD6
Sapphire 4870 Toxic 1GB: Coolermaster HAF : BlackIce360 Rad : Apogee GT : DTek-Customs Rez.
Sapphire 4870 Toxic 1GB: Coolermaster HAF : BlackIce360 Rad : Apogee GT : DTek-Customs Rez.
-
- Registered User
- Posts: 12310
- Joined: 28 Nov 2005, 02:00
- Location: That other place
- Contact:
- Firestrm_ZA
- Deliciously Moist Cake
- Posts: 16644
- Joined: 13 Mar 2008, 02:00
- Processor: AMD Ryzen 7 5950X
- Motherboard: ROG Strix B550-F Gaming
- Graphics card: EVGA 3080Ti XC3 Ultra
- Memory: 32GB 3600 G-Skill Trident Z RGB
weee so when i eventually do 9800 sli i can jam all that in a run ice cold
https://carbonite.co.za - CUD central
- Firestrm_ZA
- Deliciously Moist Cake
- Posts: 16644
- Joined: 13 Mar 2008, 02:00
- Processor: AMD Ryzen 7 5950X
- Motherboard: ROG Strix B550-F Gaming
- Graphics card: EVGA 3080Ti XC3 Ultra
- Memory: 32GB 3600 G-Skill Trident Z RGB
-
- Permanently Banned
- Posts: 167
- Joined: 28 Jun 2007, 02:00
- Firestrm_ZA
- Deliciously Moist Cake
- Posts: 16644
- Joined: 13 Mar 2008, 02:00
- Processor: AMD Ryzen 7 5950X
- Motherboard: ROG Strix B550-F Gaming
- Graphics card: EVGA 3080Ti XC3 Ultra
- Memory: 32GB 3600 G-Skill Trident Z RGB
*cough* id10t need to buy t3h sleeving first.... sponsors welcome *cough*Domino_PhoeniX wrote:cough* should sleeve your power cables cough*
https://carbonite.co.za - CUD central