So I had an old and Ugly looking LCD, And did a real quick mod on it.
The Stuff I used.
2 packs of screws and nuts
5x12mm and 10x25mm
and a couple of metal strips bought from Builders warehouse.
I only had to drill 4 holes all together cus i couldnt find brackets the same
hole spacing 2 at the bottom for the bar going up towards the LCD panel
and 2 for the original LCD's hinge bracket.
And thats it
This all took about 30mins and costed a R95.90
All i still need to do is mount the control PCb(Up down , Power, enter)
properly and
add a cover for the back, so someone don't shock.
Or Mebe lower the LCD panel a bit, seems a bit high.
And this will be my LAN monitor, So i dont have to carry my heavy bottom CRT around.
The END
Cheers
SBSP's 30Min LCD MOD (8 Pics 56k warning)
-
- Registered User
- Posts: 12310
- Joined: 28 Nov 2005, 02:00
- Location: That other place
- Contact:
-
- Registered User
- Posts: 2701
- Joined: 17 Aug 2004, 02:00
- Location: What? You mean you can't see me?
- Contact:
Not to put you down, but what would be an AWESOME mod is to take that LCD, and mod it into the side of your case. Then, salvage a laptop's touch pad and get a min keyboard, and mod it so that it slides out from under the screen. and, viola! Only 1 item you need to carry to the next LAN!
If I can't find a friendship problem...I'll make a friendship problem!
http://www.youtube.com/watch?v=Lxo1qlk6gEI
http://www.youtube.com/watch?v=Lxo1qlk6gEI