Ok, your CPU should be running at 2GHz (I think). So first things first. in your bios reduce your HTT multiplier to 4x default should be 5x. Then lock your PCI-E / PCI bus to default speeds (I hope your mobo can do this). Then lower your memory multiplier by one setting(again, I don't know what your mobo can do). Then if all that is sorted out push your FSB to 250 which should get your CPU running at 2.5GHz (all Athlon CPU's reach this easily). If you want to push further you'll need more Vcore voltage and further reduce the HTT multiplier and maybe even the ram, as I don't know what timings / frequencies your memory can do.
It actually runs at 2.2, but I'll use your advice. Thanks.
ADV4NCED wrote:PSU is very important when it comes to overclocking btw
AOpen 700W.
(Seeing as this thread is no longer relevant to modding and is more applicable to cooling and overclocking, I'd be grateful for someone to move it to the relevant section.)
