Super Pi Scores, Post yours here.

LordRage · Post by **LordRage** » 11 Aug 2006, 13:01

ColonelDebugger - what are u cooling it with? Great score by the way

ColonelDebugger · Post by **ColonelDebugger** » 11 Aug 2006, 13:04

AlphA wrote:Thanks Colonel....Whats the price of the entry level one? Sorry for all the questions, but the pricelists i have either dont have a price or dont have the CPU's at all....

Well done on the 13 second score.....Thats unbelievable!

Mmmm, I'm not a dealer, but I've seen the E6300 advertised for R1700.

http://www.prophecy.co.za/index.php?opt ... ory_id=271

Trapnal and Syndicate will be able to tell you more.

AlphA · Post by **AlphA** » 11 Aug 2006, 13:21

Thank you Colonel...

I34z1k · Post by **I34z1k** » 11 Aug 2006, 16:21

cYcLIc wrote:1M = 38s

How annoying!

MWHAHAHA BEAT YOU!!!!!

@ 37s...

Bloodmonk · Post by **Bloodmonk** » 11 Aug 2006, 17:57

Is 33's 1m alright for a 3800+ x2 @2.4ghz???????

AlphA · Post by **AlphA** » 11 Aug 2006, 18:44

Bloodmonk - I dont think you score is what it could be. I managed to get my P4 630 running on an entry level MSI board and Kingston ValueRam down to 35 seconds.

LordRage · Post by **LordRage** » 11 Aug 2006, 18:49

Bloodmonk wrote:Is 33's 1m alright for a 3800+ x2 @2.4ghz???????

at 2.5, my single core, single channel memory(754 is not dual channel memory) 3400+ got 34s, so I think you have some tweaking to do.

Bloodmonk · Post by **Bloodmonk** » 11 Aug 2006, 19:12

AlphA wrote:Bloodmonk - I dont think you score is what it could be. I managed to get my P4 630 running on an entry level MSI board and Kingston ValueRam down to 35 seconds.

do u know how I can get it to where it has to be?

Bloodmonk · Post by **Bloodmonk** » 11 Aug 2006, 19:29

Somethings wrong.... I just downloaded the new Super Pi Mod 1.5x

and it gives me a 38.813's on the 1m

can anybody help me please.... I dont have the performance that I should have....

Fcon_Vpro · Post by **Fcon_Vpro** » 11 Aug 2006, 19:38

Bloodmonk wrote:Somethings wrong.... I just downloaded the new Super Pi Mod 1.5x

and it gives me a 38.813's on the 1m

can anybody help me please.... I dont have the performance that I should have....

That score seems about right. Firstly your memory isnt matched correctly. Also the dual cores dont run as fast as single cores... except for conroe but in terms of AMD, a single core cpu will easily kill a dual core at the same speeds.

My 3800+x2 @ 2.85Ghz only got me 30odd seconds on superpi... whereas my 4000+ @2.92Ghz got me 27.59s.

Superpi scores need high FSB with high bandwidth memory and tight timing memory. Also make sure your command rate on your memory isnt running at 2T instead of 1T.

But basically I think whats letting your score down is your memory... 2 different chips.... 1Gigx2 which probably has crappy timings and Im assuming u only running at DDR400.

Bloodmonk · Post by **Bloodmonk** » 11 Aug 2006, 19:54

My memory timings is running at 2.5-3-3-6 and I oc'ed a little bit more to 2.8 and I get 34's now....

Thanks for the advice Fcon_vpro

Fcon_Vpro · Post by **Fcon_Vpro** » 11 Aug 2006, 19:59

No problem. Thats a pretty good overclock to 2.8... but your score should be better than 34s at that speed.
Your timings are pretty tight for that memory... So im sure the problem might be a command rate of 2T instead of 1T.
Do you have 2x1Gb memory or 4x512Mb memory?
Can you post a screenshot of your memory details from CPUz?
And a screenshot of A64 Tweaker if possible?

ColonelDebugger · Post by **ColonelDebugger** » 11 Aug 2006, 20:20

LordRage wrote:ColonelDebugger - what are u cooling it with?

Zalman 9500 with Arctic Silver 5

(BTW Thanks

)

AlphA · Post by **AlphA** » 11 Aug 2006, 20:31

Yassis! Just looked at your specs ColonelDebugger..... You are running one kick-@$$ PC.

Bloodmonk · Post by **Bloodmonk** » 11 Aug 2006, 20:37

Fcon_Vpro wrote:No problem. Thats a pretty good overclock to 2.8... but your score should be better than 34s at that speed.
Your timings are pretty tight for that memory... So im sure the problem might be a command rate of 2T instead of 1T.
Do you have 2x1Gb memory or 4x512Mb memory?
Can you post a screenshot of your memory details from CPUz?
And a screenshot of A64 Tweaker if possible?

My cpu is running at 2.6 now....I've got 4x512mb and its running at 2.5-3-3-5 at 2T thats the tightest I can get it and I got 36's

FiveInARow · Post by **FiveInARow** » 11 Aug 2006, 20:41

I'm almost too embarrised to submit, but this is the first time i'm running this app on a celeron 2.6 oc'd to 2.8

My score was 1 min 10 secs
sorry no screenshot, but i'm gonna try to get my score u a bit later, don't have enough time now

Fcon_Vpro · Post by **Fcon_Vpro** » 11 Aug 2006, 20:44

Bloodmonk wrote:
Fcon_Vpro wrote:No problem. Thats a pretty good overclock to 2.8... but your score should be better than 34s at that speed.
Your timings are pretty tight for that memory... So im sure the problem might be a command rate of 2T instead of 1T.
Do you have 2x1Gb memory or 4x512Mb memory?
Can you post a screenshot of your memory details from CPUz?
And a screenshot of A64 Tweaker if possible?
My cpu is running at 2.6 now....I've got 4x512mb and its running at 2.5-3-3-5 at 2T thats the tightest I can get it and I got 36's

On that motherboard of yours you should be able to run 4 chips at 1T. Force it to 1T and run a memory divider that will get it to DDR400.
Im sure 2T is holding you back.
If you cant get 1T, then take out 2 chips and run only 1Gb(2x512).
Running on 2 chips will definetly allow you to run 1T.
Superpi doesnt need memory size... it needs memory bandwidth and tight timings.
Let me know what you can get right.

LordRage · Post by **LordRage** » 11 Aug 2006, 21:31

Bloodmonk wrote:
Fcon_Vpro wrote:No problem. Thats a pretty good overclock to 2.8... but your score should be better than 34s at that speed.
Your timings are pretty tight for that memory... So im sure the problem might be a command rate of 2T instead of 1T.
Do you have 2x1Gb memory or 4x512Mb memory?
Can you post a screenshot of your memory details from CPUz?
And a screenshot of A64 Tweaker if possible?
My cpu is running at 2.6 now....I've got 4x512mb and its running at 2.5-3-3-5 at 2T thats the tightest I can get it and I got 36's

just a suggestion.. a little trick I learnt from some very smart people. 1st use only 1 stick. see how far you can push it 1:1, and keep the timings tight. Then bench. using one stick will most likely push you a little bit higher than more. Also I was told AMD doesnt really like 4 sticks. so if u wanna bench dual channel, try only using 2 sticks.. its just a suggestion, but it might work. There are other things you can do, like disabling services, running different priorities etc.. but that should be once you know u have reached your hardwares limit..

EDIT - just to explain - some systems will go higher 1:1 with only one stick running single channel, than they will dual channel.. so its worth a shot.

Bloodmonk · Post by **Bloodmonk** » 11 Aug 2006, 21:35

Fcon_Vpro wrote:
Bloodmonk wrote:
Fcon_Vpro wrote:No problem. Thats a pretty good overclock to 2.8... but your score should be better than 34s at that speed.
Your timings are pretty tight for that memory... So im sure the problem might be a command rate of 2T instead of 1T.
Do you have 2x1Gb memory or 4x512Mb memory?
Can you post a screenshot of your memory details from CPUz?
And a screenshot of A64 Tweaker if possible?
My cpu is running at 2.6 now....I've got 4x512mb and its running at 2.5-3-3-5 at 2T thats the tightest I can get it and I got 36's
On that motherboard of yours you should be able to run 4 chips at 1T. Force it to 1T and run a memory divider that will get it to DDR400.
Im sure 2T is holding you back.
If you cant get 1T, then take out 2 chips and run only 1Gb(2x512).
Running on 2 chips will definetly allow you to run 1T.
Superpi doesnt need memory size... it needs memory bandwidth and tight timings.
Let me know what you can get right.

I changed my mem to 1T and no improvement...!!!

But in Sisoft sandra lite 2007 I get higher score than a 4800+ X2 and FX60

Fcon_Vpro · Post by **Fcon_Vpro** » 11 Aug 2006, 21:52

Try running 1 or 2 sticks like LordRage said and let me know....

What divider are you using for memory ?

Bloodmonk · Post by **Bloodmonk** » 12 Aug 2006, 04:01

Fcon_Vpro wrote:Try running 1 or 2 sticks like LordRage said and let me know....

What divider are you using for memory ?

1 stick and 2 stick still gives me the same performance....my mem devider is 140....!!!

MrBean · Post by **MrBean** » 16 Sep 2006, 04:37

Hello,
I made 12.719sec on SuperPI with Conroe X6800.

Watercooled, and 4020mHz.

Have fun.

Post by **Anakha56** » 16 Sep 2006, 05:24

DUDE!!! THATS FRIGGIN AWESOME!!!

sorry caps got stuck

Welcome back! How have you been? Hows OZ?

And hows your new machine?

AlphA · Post by **AlphA** » 16 Sep 2006, 07:25

MrBean wrote:Hello,
I made 12.719sec on SuperPI with Conroe X6800.

Watercooled, and 4020mHz.

Have fun.

8O 8O

Great score!

BioFreak · Post by **BioFreak** » 16 Sep 2006, 09:15

Hi there all,

Not as high as MrBean, but I am running SupperPI 1m in 18.828

Running:

Gigabyte 965P S3
Intel Core 2 Duo 6400 @ 3.2Ghz on stock HSF
2x 512Mb DDR2-800 Trancend @ 3,4,3,3,7