no signal after installing gpu please help
-
- Registered User
- Posts: 68
- Joined: 28 Jul 2012, 00:45
no signal after installing gpu please help
High guys I have a problem I just got my new HD 6670 but when i installed it I get no signal from my screen but when i remove the gpu and put the display connector back in the mobo the display works fine. I have uninstalled my hd drivers and changed my bios to disable the hd drivers "from peg/igp to peg/pci" another thing is that even when i'm in peg/pci mode my igp still works.
Pc specs:
intel core i3 540
foxconn h55mxv
6gb ram
using dvi output
Pc specs:
intel core i3 540
foxconn h55mxv
6gb ram
using dvi output
-
- Registered Pervert
- Posts: 6879
- Joined: 30 Jul 2004, 02:00
- Processor: Intel i7 4790k
- Motherboard: MSI Z97 Gaming 7
- Graphics card: MSI GTX780Ti Gaming
- Memory: G.Skill Sniper 1866mhz 16GB
- Location: The Greater Unknown
- Contact:
Re: no signal after installing gpu please help
Do you get any signal either analog or digital from your mobo with the installed card?
Have you disabled cpu gfx from your bios?
Have you changed your main display in windows to radeon?
Have you disabled cpu gfx from your bios?
Have you changed your main display in windows to radeon?
-
- Registered User
- Posts: 68
- Joined: 28 Jul 2012, 00:45
Re: no signal after installing gpu please help
I don't get any signal I don't even get a beep at start up all that happens is the computer starts but nothing on screen neither digital or analog the screen just shuts down. The on settings in bios is peg/igp, igp, peg/pci, pci/igp.
-
- Registered Pervert
- Posts: 6879
- Joined: 30 Jul 2004, 02:00
- Processor: Intel i7 4790k
- Motherboard: MSI Z97 Gaming 7
- Graphics card: MSI GTX780Ti Gaming
- Memory: G.Skill Sniper 1866mhz 16GB
- Location: The Greater Unknown
- Contact:
Re: no signal after installing gpu please help
The card has power right?
-
- Registered User
- Posts: 68
- Joined: 28 Jul 2012, 00:45
-
- Registered Pervert
- Posts: 6879
- Joined: 30 Jul 2004, 02:00
- Processor: Intel i7 4790k
- Motherboard: MSI Z97 Gaming 7
- Graphics card: MSI GTX780Ti Gaming
- Memory: G.Skill Sniper 1866mhz 16GB
- Location: The Greater Unknown
- Contact:
Re: no signal after installing gpu please help
The card is properly plugged into the pci-e slot right? The ram brackets aren't blocking the card from going in properly right? While your card is plugged in and pc turned on did you try to change your cable between the onboard and the card?
-
- Registered User
- Posts: 68
- Joined: 28 Jul 2012, 00:45
Re: no signal after installing gpu please help
It's plugged in right. Ram brackets nowhere near the card.
-
- Registered Pervert
- Posts: 6879
- Joined: 30 Jul 2004, 02:00
- Processor: Intel i7 4790k
- Motherboard: MSI Z97 Gaming 7
- Graphics card: MSI GTX780Ti Gaming
- Memory: G.Skill Sniper 1866mhz 16GB
- Location: The Greater Unknown
- Contact:
Re: no signal after installing gpu please help
Do you hear your windows start up sound when your system is booted? My guess from the igp/pci setting might be that when not gaming or not having set your screen to which ever one you want that it first uses the onboard for everything.
Do you have 2 cables? Does your screen have 2 inputs. Try to have your card installed, have a cable from your onboard to your screen and a cable from your gfx card to your screen, then change the source and see what happens.
Do you have 2 cables? Does your screen have 2 inputs. Try to have your card installed, have a cable from your onboard to your screen and a cable from your gfx card to your screen, then change the source and see what happens.
Re: no signal after installing gpu please help
Does the card have a mini HDMI port? A friend of mine had an issue where the card defaulted to the mini HDMI because it conflicted with the integrated audio.
Ceterum autem censeo Samsung Mobile esse delendam.
When something is important enough, you do it even if the odds are not in your favor.
- Elon Musk
When something is important enough, you do it even if the odds are not in your favor.
- Elon Musk
-
- Registered User
- Posts: 68
- Joined: 28 Jul 2012, 00:45
Re: no signal after installing gpu please help
My pc makes no beeps at startup. I tried the 2 cables but still nothing. yes the gpu has a mini hdmi port but I don't have a hdmi connector.
-
- Registered Pervert
- Posts: 6879
- Joined: 30 Jul 2004, 02:00
- Processor: Intel i7 4790k
- Motherboard: MSI Z97 Gaming 7
- Graphics card: MSI GTX780Ti Gaming
- Memory: G.Skill Sniper 1866mhz 16GB
- Location: The Greater Unknown
- Contact:
Re: no signal after installing gpu please help
Disable your onboard audio and see what happened when you then run the card.
-
- Registered User
- Posts: 68
- Joined: 28 Jul 2012, 00:45
Re: no signal after installing gpu please help
how do i disable my onboard audio.
-
- Registered Pervert
- Posts: 6879
- Joined: 30 Jul 2004, 02:00
- Processor: Intel i7 4790k
- Motherboard: MSI Z97 Gaming 7
- Graphics card: MSI GTX780Ti Gaming
- Memory: G.Skill Sniper 1866mhz 16GB
- Location: The Greater Unknown
- Contact:
Re: no signal after installing gpu please help
in the bios
- hamin_aus
- Forum Moderator
- Posts: 18363
- Joined: 28 Aug 2003, 02:00
- Processor: Intel i7 3770K
- Motherboard: GA-Z77X-UP4 TH
- Graphics card: Galax GTX1080
- Memory: 32GB G.Skill Ripjaws
- Location: Where beer does flow and men chunder
- Contact:
Re: no signal after installing gpu please help
Have you tried the card in another PC
-
- Registered User
- Posts: 68
- Joined: 28 Jul 2012, 00:45
Re: no signal after installing gpu please help
I've disabled the audio and tried the card in another pc and it worked I also tried a friends one in my pc and it works.
-
- Registered User
- Posts: 68
- Joined: 28 Jul 2012, 00:45
Re: no signal after installing gpu please help
I even updated my bios.
- rustypup
- Registered User
- Posts: 8872
- Joined: 13 Dec 2004, 02:00
- Location: nullus pixius demonica
- Contact:
Re: no signal after installing gpu please help
what PSU are you running and what is the current draw on the box?
Most people would sooner die than think; in fact, they do so - Bertrand Russel
-
- Registered User
- Posts: 68
- Joined: 28 Jul 2012, 00:45
Re: no signal after installing gpu please help
OK guys it turns out the pci-e slot was in it's last days so thanksfor all your posts.
- hamin_aus
- Forum Moderator
- Posts: 18363
- Joined: 28 Aug 2003, 02:00
- Processor: Intel i7 3770K
- Motherboard: GA-Z77X-UP4 TH
- Graphics card: Galax GTX1080
- Memory: 32GB G.Skill Ripjaws
- Location: Where beer does flow and men chunder
- Contact:
Re: no signal after installing gpu please help
I know that feel bro.PC G@MER 01 wrote:OK guys it turns out the pci-e slot was in it's last days
When the PCI-E slot on my last PC was dying it would randomly refuse to boot up, but if you kept powering down and powering on eventually it would boot. Then would go for a few days just fine before starting again.
I tested every component in my PC and they all worked, even the damn PCI-E slot, so I was baffled when it would happen for months until one day it finally just gave up...
-
- Registered Pervert
- Posts: 6879
- Joined: 30 Jul 2004, 02:00
- Processor: Intel i7 4790k
- Motherboard: MSI Z97 Gaming 7
- Graphics card: MSI GTX780Ti Gaming
- Memory: G.Skill Sniper 1866mhz 16GB
- Location: The Greater Unknown
- Contact:
Re: no signal after installing gpu please help
That's sad and I am gonna guess you don't have the money to replace the board. Is the board still under warrenty? Can they repair or must it be replaced?
- Ron2K
- Forum Technical Administrator
- Posts: 9050
- Joined: 04 Jul 2006, 16:45
- Location: Upper Hutt, New Zealand
- Contact:
Re: no signal after installing gpu please help
Out of interest, and for the benefit of the next person who comes here with a problem similar to yours, how did you trace it to the PCIe slot?PC G@MER 01 wrote:OK guys it turns out the pci-e slot was in it's last days so thanksfor all your posts.
Kia kaha, Kia māia, Kia manawanui.