PCFormat Forum Archive

Weird... Maybe clocking the gfx too much? Run the ram @ 5-5-5-15. Its just generic and you don't benefit much from the timings

I34z1k wrote:Weird... Maybe clocking the gfx too much? Run the ram @ 5-5-5-15. Its just generic and you don't benefit much from the timings

No the card is running at stock....yeah weird tell me about will try 5/5/5/15 but the ram is rated cl4 so it should not be a problem......

Only other solution is to oc slowly till I get the problem and try and fix it from there......

You running 4x sticks so it likes alot more juice to get it stable. Try just a pair?

are you running the latest versions of 3DMark? Also, why you using SP1?

Do yourself a favour and run DUAL orthos overnight

I34z1k wrote:Do yourself a favour and run DUAL orthos overnight

Lol pretty sure this heat won't allow it here in the freestate....

Yeah tried 1 stick 2 sticks and 4 sticks but it is pretty stable with 2 sticks in extra juice seems to get 4 sticks stable....

But i'm pretty sure that heat is my main issue....!!!

Well lets see there is nearly no gain of using XP SP2 besides nearly 80% of that SP is security updates which annoys the crap out of me....

Dude if you get 2000 point gain from using SP2 I'll be the first to update

Yea...

I meant to tell you. Or rather ask. Give me a coretemp screen.

I34z1k wrote:Yea...

I meant to tell you. Or rather ask. Give me a coretemp screen.

Get a new suppi lol.

Ok cool What hsf you looking at?

I34z1k wrote:Get a new suppi lol.

Ok cool What hsf you looking at?

Leave my "Pi" alone works just fine...I don't need the added seconds....!!!

Zalman CNPS9700 have all ready ordered it should have it soon

edit:
I hear thunder!!! sweet mabye it will cool down enough for another test today!!!!!!!!

Great stuff GET TO IT

I34z1k wrote:You really are an ignorant noob aren't you? Or just plain stupid?

05 is a single thread application you potato muncher where 06 benefits from quads. 01 is a bench that is less gfx based so the whole system and tweaks make more of an impact. Go play cs1.6 or something that you don't need a brain for.

hahaha. . . . BURN!!!!!!!!!!!!

I njoyed that!

hehe, ill try dl 05 2nite, but i still wanna know ur 06 scores Very Happy

Evax, weren't you the guy that used play dota at unreal with me andrei, nick, graham etc...? lol remember your nick.

wizardofid, your suppi is really old! zalman should help your temps quite nicely. You have a B3 quad, which runs quite hot. The G0 revision afterwards was quite a bit cooler.

Lol. No, i went to unreal a few times to play cs like 4 years ago but thats about it. Maybe i just pwnt so much in dota u remembered my nick

lol yeah must've been

So whats the story with this benching guys? we need more peeps to compete!

Its about time seeing that 3.6ghz Wizard. Now we can play proper at 3.6ghz benchies.

I will play once my water is back on. Wanna put water on my card aswell. Need to get sinks for the other lil acessories IC's on the card.

DoOb wrote:Its about time seeing that 3.6ghz Wizard. Now we can play proper at 3.6ghz benchies.

I will play once my water is back on. Wanna put water on my card aswell. Need to get sinks for the other lil acessories IC's on the card.

Yeah sweet dude getting my stuff this week was shipped today *sob*....

Well guys I will only be benching again in 1/5 weeks time going on a 7 day trip down to Gonubie at a resort next to the kei river mouth for some much needed rest....


Like most websites running their benches at 3.6 I think it would be a good idea to extent a little further any speed above 3.6 will be excepted.

However to be a valid challenge I screenshot needs to be attached of running orthos for a min of 4 hours....

What do you guys think about that, should make it a little more intersting???

Na no orthos stuff, if you can run the benchmarks without freezing then there is no point, coz you only run orthos if you want that for a 24/7 OC.

But Ya i rate 3.8ghz is another good milestone to cross in this.

3.6ghz is cool and all but havnt seen guys do tweaking at 3.8.

Anyway thats just my opinion, im quiet happy at 3.6ghz. But just no Orthos

DoOb wrote:Na no orthos stuff, if you can run the benchmarks without freezing then there is no point, coz you only run orthos if you want that for a 24/7 OC.

But Ya i rate 3.8ghz is another good milestone to cross in this.

3.6ghz is cool and all but havnt seen guys do tweaking at 3.8.

Anyway thats just my opinion, im quiet happy at 3.6ghz. But just no Orthos

Lol "making chicken sounds"

Sweet dude

Let the Games Begin, heheh

DoOb wrote:Let the Games Begin, heheh

Nah not tonight XP has gone bonkers need to format but at least I still got vista to play around on.......

I first wanna swap the CPU out with my Pentuim D the last bench I did was at 3.9 I wanna check if I can get a little higher to at least 4.5 with ddr800
And bench it

Then take my 8600GT and bench it wanna see if I can get any good scores out of it and push for a 25 superpI and good 3dmark01 scores of at least 45000

Gotta say, i personally won't do the orthos thing. Don't have time to spend on that.

2nd that

Sweet no to orthos then.

Can't wait to see what doOb pulls out of his hat...!!!!

wizardofid wrote:Sweet no to orthos then.

Can't wait to see what doOb pulls out of his hat...!!!!

Yea but now im running 1 stick of 1gig, my one stick is faulty.

Im really having some bad luck