Page 6 of 6
Re: Project: Paris Hilton
Posted: 21 Nov 2009, 16:24
by djwez
looking forward to this!!
Re: Project: Paris Hilton (Cap killer update)
Posted: 21 Nov 2009, 17:36
by Samaya
No more waiting!!!
I did a bit today, not much but it was fun. I have decided that this will now become a HTPC to serve in the bedroom. I can add USB ports to the red perspex which will be very convenient.
Firstly I had to dust off the old hag.
There are a couple of issues that will need alot of head scratching to fix like this
One thing that had everyone worried was the air cooling of the graphics card. This is what kept me busy for most of the afternoon
I then finished the side part of the enclosure
And it was inspected by a very competent person...
Assembled with some clear epoxy
And then on the side, I fixed my Dremel to my work table. This way works VERY well to cut those slots
Hope you ppl enjoyed and hopefully I won't take another year for this mod to finish
Re: Project: Paris Hilton
Posted: 21 Nov 2009, 17:57
by djwez
mooi man
not much but at least your getting somewhere. what happened to the plexi panel?
Re: Project: Paris Hilton
Posted: 21 Nov 2009, 18:13
by Samaya
I didn't measure properly. I will have to take about 3mm off of the clear side piece.
Re: Project: Paris Hilton
Posted: 21 Nov 2009, 19:38
by djwez
Samaya wrote:I didn't measure properly. I will have to take about 3mm off of the clear side piece.
always happens hey.... end up getting a little excited and some times end up rushing things and making mistakes
but then again anything can be fixed. sometimes its just not cheap though
Re: Project: Paris Hilton
Posted: 22 Nov 2009, 00:15
by Prime
I dig the cover
Neat solution to a tricky problem
Moar!
Re: Project: Paris Hilton
Posted: 18 Dec 2009, 20:34
by Lithe_Joint
They say he eats his breakfast with chopsticks...
They say he had James Bond for dinner...and, he has the scull to prove it...
Ladies and gentlemen...
Samaya is back.
Re: Project: Paris Hilton
Posted: 16 Jun 2010, 21:02
by Samaya
Hey look I modded again.
Again not much but kept me busy while I waited for paint to dry (which didn't...)
So what did I do?
I made a guide:
To cut slots
3 of them exactly
(Nice and straight)
To supply the CPU with some fresh air
I just saw how DIRTY this mod is... probably because its seeing some wood dust falling all over it
When is the next Public holiday again? I might mod again then...
SMY
Re: Project: Paris Hilton
Posted: 17 Jun 2010, 00:00
by DAE_JA_VOO
Awesome! Good to see you modding again!
Re: Project: Paris Hilton
Posted: 15 Oct 2010, 15:37
by Samaya
I am probably never going to finish this mod. I won't have a use for it so its going into storage. I do have something else thats moving and opening that will have a use. New hardware coming next year will have to have a new case.
Re: Project: Paris Hilton
Posted: 15 Oct 2010, 15:56
by DAE_JA_VOO
Bummer
Re: Project: Paris Hilton
Posted: 18 Oct 2010, 11:50
by Samaya
Well its not a complete bummer...